๐ฅ Gecko Gel ๐ฅ
๐ฆ๐ฆ๐ฆ๐ฆ How to use Gecko Gel:
First, the container must be kept in the refrigerator ๐ค
Second, place a drop of gel on the walls, about two hand spans below the ceiling, before sunset ๐
The next day, you will wake up and find the geckos fallen on the ground under the gel spots ๐ฆ๐ฆ
๐๏ธ๐๏ธ Difference between Gecko Gel and Gecko Spray ๐ฆ๐ฆ
#Gecko Gel from Laster
A bait applied as drops on walls that traps geckos and kills them immediately ๐๐ช
So, you used to sell Gecko Spray, and today you are offering Gecko Gelโฆ whatโs the difference? ๐ค๐ค๐ค
Iโll explain ๐ The spray covers a large area and is suitable for open spaces like staircases or balconies, or in cases where geckos might enter ๐ฆ๐ฆ๐ฆ
But the gel is used when you already have geckos inside and want to catch them ๐๐ฆ
So the spray is used on window edges from the outside or inside so that if a gecko enters it dies ๐
But the gel is used when a gecko has already entered and the area was not protected with spray ๐ฆ๐ฆ๐ฆ๐ฆ๐ฆ๐ฆ๐ฆ
The gel is placed about one meter above the ground, along tile joints on the sides of areas where geckos are present ๐ฆ๐ฆ
80 EGP
โจ Say Goodbye to Weevils! โจ
๐ช An effective formula that quickly eliminates weevils and helps protect your products and belongings from damage ๐กโจ
๐น How to Use:
Spray the product in areas where insects are present, as well as in cracks and corners, for the best results ๐ฅ๐ช
โ
Highly effective
โ
Easy to use
โ
Noticeable results from the first application
105 EGP
Bed bugs especially need heavy spraying.
One room usually needs about 3 liters of spray.
You should spray 3 times over 3 weeks โ one 1-liter bottle each week โ but it has to be a thorough treatment.
Like this ๐๐
First, remove all mattresses and pillows from the bed.
Start by spraying all the walls in the room.
Then spray the entire bed frame without leaving even a single inch.
After that, spray every part of the bed base piece by piece, making sure not to miss any spot, and also spray the floor underneath the bed.
Then open the mattress seams/openings and spray well inside them.
Next, spray each bed board/slat one by one and stack them afterward.
Then open the pillows and spray the sides and surface of the mattresses as well.
After that, spray all bedding, the walls, and around the electrical outlets.
Then repeat the whole process two more times.
Itโs also important to regularly air out the bedding and expose it to sunlight.
110 EGP